Share:
SikaTop® Seal-107 (MY) Cementitious waterproofing slurry and protective coating
SikaTop® Seal-107 (MY)
- Pre-batched components - mixes and applies easily
- Slurry or trowellable consistency
- Good adhesion to sound, prepared substrates
Usage
SikaTop® Seal-107 (MY) is used for:- Interior and exterior waterproofing and damp-proofing of concrete, cementitious rendering, brickwork and blockwork
- Protection of concrete structures against the effects of de-icing salts and freeze-thaw attack
- Exterior waterproofing of basement walls in new construction and refurbishment
- Pore / blowhole filling
- Rigid waterproofing of water tanks, bathrooms, toilets, etc.
- Sealing fine “hairline” cracks in concrete structures not subject to movement
- Sealing internal basement walls against dampness
- Levelling mortar for concrete repair works
- Potable concrete water tanks
- Basements
- Terraces and balconies
- Retaining walls
- Fountains
- RC gutters and planter boxes
- Bathroom floors
- Seawalls
Advantages
- Pre-batched components - mixes and applies easily
- Slurry or trowellable consistency
- Good adhesion to sound, prepared substrates
- Increased frost and salt resistance
- Protects against concrete carbonation and water penetration
- Non toxic - suitable for contact with drinking water
- Non corrosive to steel or iron
Packaging
|
Part A |
5 kg can |
|
Part B |
20 kg bag |
|
Part A+B |
25 kg set |
Colour
|
Part A |
White liquid |
|
Part B |
Grey powder |
|
Part A+B |
Grey slurry |
Product Details
APPROVALS / STANDARDS
- Approved for contact with potable water
- SPAN - MS1583:Part 1:2003
- SIRIM - MS 1583:Part 1:2003, SS 375 : Part 1 : 2001, BS 6920-1:2014
- Singapore Green Label: 032-118-2813 "Environmentally Preferred Coating"
Application
Fresh Mortar Density
1.9–2.0 kg/l
Pot Life
~30 minutes (at +30 °C). Pot life will be shortened at higher temperatures.
Waiting Time / Overcoating
Waiting Time
The waiting time between coats is 4–8 hours (at +30 °C).
Overcoating
For overcoating with other cementitious materials, allow the second coat to harden for at least 3 days prior to overcoating.
For use in water-retaining structures or for applying renders over it or for overcoating with non-cementitious materials, please contact Sika's Technical Service Department.
Curing Treatment
Generally not required but precautions should be taken for applications done directly under sunlight and windy conditions.
Inquiry - SikaTop® Seal-107 (MY) Cementitious waterproofing slurry and protective coating
