Share:
Sika AnchorFix® S
- Fast curing
- Non-sag, even overhead
- ETA for anchoring in uncracked concrete
Usage
As a fast curing anchoring adhesive for all grades of:- Rebars / reinforcing steel
- Threaded rods
- Bolts and special fastening systems
- Concrete
- Hollow and solid masonry
- Hard natural stone*
- Solid rock*
Advantages
- Fast curing
- Non-sag, even overhead
- ETA for anchoring in uncracked concrete
- Low wastage
Packaging
| 300 ml standard cartridge |
12 cartridges per box |
|
pallet: 75 boxes |
Colour
| Component A: |
white |
| Component B: | black |
| Component A+B mixed: | light grey |
Product Details
APPROVALS / STANDARDS
- CE marking and Declaration of Performance as Bonded injection type anchor for use in uncracked concrete according to EAD 330499-00-0601, based on ETA-13/0721 of 18/05/2018 and certificate of constancy of performance of the construction product issued by notified product certification body.
Application
Mixing Ratio
Component A : component B = 10 : 1 by volume
Layer Thickness
3 mm max.
Sag Flow
Non-sag, even overhead
Product Temperature
Sika AnchorFix® S must be at a temperature of between +5 °C and +40 °C for application.
Ambient Air Temperature
+5 °C min. / +40 °C max.
Dew Point
Beware of condensation.
Substrate temperature during application must be at least 3 °C above dew point.
Substrate Temperature
+5 °C min. / +40 °C max.
Curing Time
|
Temperature |
Open time - Tgel |
Curing time - Tcur |
|
+40 °C |
1.5 minutes |
10 minutes |
|
+35 °C – +40 °C |
1.5 minutes |
15 minutes |
|
+30 °C – +35 °C |
2 minutes |
20 minutes |
|
+25 °C – +30 °C |
3 minutes |
30 minutes |
|
+20 °C – +25 °C |
4 minutes |
40 minutes |
|
+10 °C – +20 °C |
6 minutes |
80 minutes |
|
+5 °C – +10°C |
12 minutes |
120 minute |
|
+5 °C* |
18 minutes |
120 minutes |
*Minimum cartridge temperature: +5 °C
Inquiry - Sika AnchorFix® S Universal anchoring adhesive
